Chris: Info about the DVI here ( http://tandy.wiki/Disk/Video_Interface#Cable ) also has a link here ( http://tandy.wiki/Disk/Video_Interface:_Cable ) on how to construct your own cable. At the bottom on the later is Mike Stein's instruction how to create the cable using on IDE cable(s). This is how I created my own.
God Bless, GregS <>< On 11/9/19 3:03 PM, Chris Oliver wrote: > OK all — received the boot disk (from Arcadeshopper — thank you Brian > White!). Now one final issue. I have a Model 100. Apparently there > is a socket adapter that you need, which inserts on the bottom of the > unit inside the ROM compartment. I already have the DVI interface > cable, but of course now I don’t have the socket adapter. I’m seeing > this on Arcadeshopper, but I’m not seeing how this directly supports > the Model 100 without the adapter: > > https://www.arcadeshopper.com/wp/?page_id=11#!/Disk-Video-Interface-cable-kit-for-Models-100-102-200/p/141211030/category=28313042 > > > Any guidance on bridging this final gap? Do I need an adapter, or > does the above cable kit somehow work? > > Many thanks to all — > > Chris > > >> On Oct 26, 2019, at 5:11 PM, Chris Oliver <[email protected] >> <mailto:[email protected]>> wrote: >> >> All, >> >> I hate to be (likely) the 100th person asking for this — but I just >> picked up a Model 100 with DVI, and I’m told that folks on this list >> have the ability to generate 5-1/4” system disks for the DVI. Is >> anyone willing/able to create one for me? Happy to pay for the >> service and shipping, to make it worthwhile. >> >> I see the files themselves >> at: >> http://club100.org/memfiles/index.php?&direction=0&order=&directory=Steve%20Adolph/DVI%20boot%20disk%20files >> >> But physically creating the floppy from the .dat file is above my pay >> grade — esp. given that I only have a Tandy Coco to work with (and >> I’m guessing the disk format is different between the Model 100 and >> the Coco). >> >> Many thanks in advance, >> >> Chris >
