Yep, that sounds about right. The simulated NADSBox has a button to
allow you to set the directory representing the "ROOT" of NADSBox.
Ken
On 11/29/19 12:57 PM, Josh Malone wrote:
Oh! Right. Sorry.
So, load the RXF.co file as I said earlier, the open peripheral setup,
and in the COM tab, check "Connect to simulated NADSBox". Click
"configure" and point to the directory that contains the rest of the
REX upgrade files.
On Fri, Nov 29, 2019 at 3:47 PM John R. Hogerhuis <[email protected]> wrote:
On Fri, Nov 29, 2019, 12:32 PM Josh Malone <[email protected]> wrote:
Using Virtual-T you can just use "File -> Load file from HD" to load
the .co file into the emulated machine. No need to use a DOS.
He is trying to upgrade virtual rex.
He has to emulate the tpdd so rexmgr can access the upgrade file on tpdd.
virtualt has a tpdd emulation.
So Bob's problem is getting the upgrade file placed on the virtual drive in the
first place.
Hopefully Ken will chime in with the right way to do this.
One other way is to use com2com and laddiealpha running on the same machine.
-- John.
