Thank you Josh and Ken!
I had not noticed that configuration option before. All good now!
Bob
-----Original Message-----
From: M100 <[email protected]> On Behalf Of Ken Pettit
Sent: Friday, November 29, 2019 6:27 PM
To: [email protected]
Subject: Re: [M100] Upgrading REX in Virtual T - where is the virtual TPDD
folder?
Yep, that sounds about right. The simulated NADSBox has a button to allow you
to set the directory representing the "ROOT" of NADSBox.
Ken
On 11/29/19 12:57 PM, Josh Malone wrote:
> Oh! Right. Sorry.
>
> So, load the RXF.co file as I said earlier, the open peripheral setup,
> and in the COM tab, check "Connect to simulated NADSBox". Click
> "configure" and point to the directory that contains the rest of the
> REX upgrade files.
>
> On Fri, Nov 29, 2019 at 3:47 PM John R. Hogerhuis <[email protected]> wrote:
>>
>>
>> On Fri, Nov 29, 2019, 12:32 PM Josh Malone <[email protected]> wrote:
>>> Using Virtual-T you can just use "File -> Load file from HD" to load
>>> the .co file into the emulated machine. No need to use a DOS.
>>
>> He is trying to upgrade virtual rex.
>>
>> He has to emulate the tpdd so rexmgr can access the upgrade file on tpdd.
>> virtualt has a tpdd emulation.
>>
>> So Bob's problem is getting the upgrade file placed on the virtual drive in
>> the first place.
>>
>> Hopefully Ken will chime in with the right way to do this.
>>
>> One other way is to use com2com and laddiealpha running on the same machine.
>>
>> -- John.
