Nothing. Exept I already said "punches". I just added examples of how they could be scavenged. Except I see now I left out the words "you could" ...make them from almost anything.
The real point was just to point out that you don't have to try to cut them manually, that there is an easy way to make perfectly round pieces of some kind of sponge material. I'm just predisposed to percieve almost anything you say as a challenge because of the way you've acted towards me several times in the past. It's completely personal and biased. -- bkw On Tue, Jan 7, 2020, 11:18 AM Mike Stein <[email protected]> wrote: > Right. He might not have any copper or even PVC pipe of the right diameter > and an appropriate cutter either; what's wrong with just another suggestion? > > m > > ----- Original Message ----- > From: "Brian K. White" <[email protected]> > To: <[email protected]> > Sent: Monday, January 06, 2020 9:26 PM > Subject: Re: [M100] Peripherals for the M100 > > > > ... assuming a $10 set of punches is available conveniently local, and > > goes up to whatever the larger size needs to be... ;-) > > > > Hey those may both be true, but I aim for least assumptions. > > > > -- > > bkw > > > > > > On 1/6/20 5:43 PM, Mike Stein wrote: > >> > >> ... or a $10 set of punches... ;-) > >> > >> ----- Original Message ----- > >> *From:* Charles Hudson <mailto:[email protected]> > >> *To:* [email protected] <mailto:[email protected]> > >> *Sent:* Monday, January 06, 2020 4:36 PM > >> *Subject:* [M100] Peripherals for the M100 > >> > >> B.K. White wrote: > >> > >> "Do that with simple punches made from pipe." My two cents: use > >> copper pipe; it is easier to work and will sharpen nicely. I used > >> that technique to cut foam pads for a Kaypro keyboard. -CH- > >> > > > > > > -- > > bkw >
