So I should not have mentioned that you could pick up a ready-made punch set
for $10.00 which might make it a little easier and possibly also be useful
elsewhere some day? Sorry.
FWIW I think you've made a huge contribution to our little community and
despite your being a PITA on occasion I and no doubt most other folks on here
appreciate it very much.
But by all means, hang on to that biased perspective and keep it going if you
must; ("I before e except after c" if you need help ;-) )
m
----- Original Message -----
From: Brian White
To: [email protected]
Sent: Tuesday, January 07, 2020 10:38 PM
Subject: Re: [M100] Peripherals for the M100
Nothing. Exept I already said "punches". I just added examples of how they
could be scavenged. Except I see now I left out the words "you could" ...make
them from almost anything.
The real point was just to point out that you don't have to try to cut them
manually, that there is an easy way to make perfectly round pieces of some kind
of sponge material.
I'm just predisposed to percieve almost anything you say as a challenge
because of the way you've acted towards me several times in the past. It's
completely personal and biased.
--
bkw
On Tue, Jan 7, 2020, 11:18 AM Mike Stein <[email protected]> wrote:
Right. He might not have any copper or even PVC pipe of the right diameter
and an appropriate cutter either; what's wrong with just another suggestion?
m
----- Original Message -----
From: "Brian K. White" <[email protected]>
To: <[email protected]>
Sent: Monday, January 06, 2020 9:26 PM
Subject: Re: [M100] Peripherals for the M100
> ... assuming a $10 set of punches is available conveniently local, and
> goes up to whatever the larger size needs to be... ;-)
>
> Hey those may both be true, but I aim for least assumptions.
>
> --
> bkw
>
>
> On 1/6/20 5:43 PM, Mike Stein wrote:
>>
>> ... or a $10 set of punches... ;-)
>>
>> ----- Original Message -----
>> *From:* Charles Hudson <mailto:[email protected]>
>> *To:* [email protected] <mailto:[email protected]>
>> *Sent:* Monday, January 06, 2020 4:36 PM
>> *Subject:* [M100] Peripherals for the M100
>>
>> B.K. White wrote:
>>
>> "Do that with simple punches made from pipe." My two cents: use
>> copper pipe; it is easier to work and will sharpen nicely. I used
>> that technique to cut foam pads for a Kaypro keyboard. -CH-
>>
>
>
> --
> bkw
