If you're using LaddieAlpha, this is a TPDD device. So you just need to back up all of your banks to your PC (through LaddieAlpha) then activate the TSDOS ROM and use that to copy RFx49.CO to your T102.
I'm about to perform exactly the same process with my 102, so I'll try it and get back to you once I test it. Tom Wilson [email protected] (619)940-6311 K6ABZ On Thu, Apr 9, 2020 at 10:45 PM Peter Noeth <[email protected]> wrote: > I am ready to update my REX to the latest firmware, but am not sure on > how to proceed. > > I read the information on the REX Wiki, and it says: "Load the rebuild > tool: Load into RAM the RFx49.CO file using the TPDD device". How is this > done? I used LaddieAlpha to put the ROM2 option ROM image in my original > REX, and I have instructions for that, but I don't use a TPDD device with > my T102, so am not sure what I need to get started on the T102 to be able > to transfer the .CO file to RAM. A step-by-step instruction would be > helpful here. > > I have downloaded the R49_M100T102_260_REBUILD.ZIP and extracted the > files to the PC in the directory where LaddieAlpha is located. Just need to > know how to get the files needed into the T102 RAM to continue the REX Wiki > procedure. > > Thanks, > > Peter >
