oh, right ;) Turbo Pascal on CP/M only runs on Z-80, not 8080 or 8085. On Wed, Sep 30, 2020 at 6:34 PM Jim Anderson <jim.ander...@kpu.ca> wrote:
> I’m not sure if you’re saying it running on the 80C85 or the Z80? > > > > > > > > > > > > > > > > jim > > > > *From:* M100 [mailto:m100-boun...@lists.bitchin100.com] *On Behalf Of *Stephen > Adolph > *Sent:* Wednesday, September 30, 2020 3:17 PM > *To:* m...@bitchin100.com > *Subject:* [M100] compile and execute Turbo Pascal > > > > *CAUTION External Sender:* Do not click links or open attachments unless > you recognize the sender and know the content is safe. > > > > Well, that feels good! > > > > I finally got Turbo Pascal 3.01 configured (well enough) and running on > Model 100! And I compiled and ran a demo provided by Borland. Sweet! > > > > Setup: > > REXCPM 2MB > > M100 CP/M (modified to remove 8085 undoc opcodes) > > Dual CPU board with 80C85 and NSC800 (socket at CPU on M100) > > Dual Main ROM adapter (need a specific mainROM for each processor) > > > > >
