That’s exactly how long it’s been for me, too, and how I felt about it before I
started to learn C. :)
jim
From: M100 [mailto:[email protected]] On Behalf Of Ken Pettit
Sent: Wednesday, September 30, 2020 4:42 PM
To: [email protected]
Subject: Re: [M100] compile and execute Turbo Pascal
CAUTION External Sender: Do not click links or open attachments unless you
recognize the sender and know the content is safe.
Hmm, I haven't programmed in Pascal since Freshman year in college. Back then
it was my favorite programming language (I hadn't learned C yet). Not sure I
would even recognize it now. :)
Ken
On 9/30/20 4:16 PM, Stephen Adolph wrote:
oh, right ;) Turbo Pascal on CP/M only runs on Z-80, not 8080 or 8085.
On Wed, Sep 30, 2020 at 6:34 PM Jim Anderson
<[email protected]<mailto:[email protected]>> wrote:
I’m not sure if you’re saying it running on the 80C85 or the Z80?
jim
From: M100
[mailto:[email protected]<mailto:[email protected]>]
On Behalf Of Stephen Adolph
Sent: Wednesday, September 30, 2020 3:17 PM
To: [email protected]<mailto:[email protected]>
Subject: [M100] compile and execute Turbo Pascal
CAUTION External Sender: Do not click links or open attachments unless you
recognize the sender and know the content is safe.
Well, that feels good!
I finally got Turbo Pascal 3.01 configured (well enough) and running on Model
100! And I compiled and ran a demo provided by Borland. Sweet!
Setup:
REXCPM 2MB
M100 CP/M (modified to remove 8085 undoc opcodes)
Dual CPU board with 80C85 and NSC800 (socket at CPU on M100)
Dual Main ROM adapter (need a specific mainROM for each processor)
