Those are nice Peter. Thank you for posting that. What is the best material to make them with?
On Monday, October 5, 2020, Peter Noeth <[email protected]> wrote: > With all this "Design Sharing" going around here :-) I decided to upload > the Option ROM Compartment Covers I designed for 3D Printing on > Thingiverse. There are three, a blank cover and two with cable slots for > those of you with DVIs. > > - Blank Cover (replacement): https://www.thingiverse.com/thing:4616011 > > - Cover w/ System Bus Cable Slot: https://www. > thingiverse.com/thing:4616079 > - Cover w/ System Bus ZIF Socket: https://www. > thingiverse.com/thing:4616062 > > I use the third one for my development Model 100. The ZIF connector makes > it easier to attach / remove the cable to the solderless breadboard I have > been using lately (for an Atari Joystick Interface for the 100/102/200). > > I have also made dust covers for all connectors on the 102, but I haven't > tested all of them on the Model 100 yet. I may upload these designs at a > later time. > > Regards, > > Peter > >
