Bert, I don't really need it so how about $20 plus shipping?
Robert -----Original Message----- From: M100 [mailto:[email protected]] On Behalf Of Bert Put Sent: Wednesday, December 16, 2020 12:39 PM To: [email protected] Subject: Re: [M100] FFC for LCD & Keyboard (M102) Hi Robert, If you still have that M-102 keyboard flat cable, I'll take it off your hands. I mangled mine in a previous operation. Cheers, Bert On 12/14/20 8:58 PM, Robert J. Hutchins wrote: > You are right... I put a n M100 lcd in a M102 by soldering the cable > ends to the motherboard . Very tricky - but worked I have an M102 cable in my > hand. Do you need it? > > > -----Original Message----- > From: M100 [mailto:[email protected]] On Behalf Of > Michael Kohne > Sent: Monday, December 14, 2020 5:44 PM > To: [email protected] > Subject: Re: [M100] FFC for LCD & Keyboard (M102) > > Robert Hutchins: The 102 has a flat flex cable - it's a thin bit of plastic > with copper laid down on it. It's not like the connectors that you see on the > 100, where yes, ide cable is just the right wire. > > Perhaps217: I did some looking on this subject. The original display FFC is > 1.25mm pitch, 152mm long (measured with calipers). > I thought that was Molex part #15168-0375 , but I ended up buying Molex part > #15168-0379 (a 202 mm FFC) as the 152 mm version was not available quantity 1. > That turned out to be a bit on the thin side, but worked fine once I backed > it with a bit of kapton tape. > > Good luck! > > On Mon, Dec 14, 2020 at 7:22 PM Robert J. Hutchins <[email protected]> > wrote: >> >> I needed to do that, and I just used some old IDE cables I had, stripped to >> the correct width. >> >> >> >> Robert >> >> >> >> From: M100 [mailto:[email protected]] On Behalf Of >> [email protected] >> Sent: Monday, December 14, 2020 3:33 PM >> To: [email protected] >> Subject: [M100] FFC for LCD & Keyboard (M102) >> >> >> >> Hello. >> >> >> >> I m looking to replace the 18-pin and 30-pin flat-flex-cables in my Model >> 102, and was wondering if anyone can confirm the dot pitch. I did order some >> 1.0 mm dot pitch from DigiKey which don t appear to be correct - the FFCs >> are too narrow: >> >> 686618152001 >> 0982670475 >> >> If someone has the information to share, and perhaps even a known good >> source that would be great. >> >> >> >> Thanks, Alan > > > > -- > Michael Kohne > [email protected] > > Anything real you do that's important will be scary. Having kids. > Getting married. Donating a kidney. Writing a book. Do it anyway. - > Neil Gaiman >
