Yes, I have flashed a Rex Classic to work on a 200. It’s a PITA, mostly to get the DOS boot loader on so I can get the TS-DOS ROM loaded. The problem being that with only 24K of RAM per bank, it’s hard to find a BASIC loader small enough to do the job.
If you need me to, I can dig through my archive and find the program I used. On Thu, Jul 8, 2021 at 1:18 PM Josh Malone <[email protected]> wrote: > REX classic and REX# come in 2 "flavors": 100/102 and 200 > > The hardware is physically identical, as is the CPLD program. However, > the FLASH load is different, owing to the different memory > configurations/maps on the 2 systems. You can "reprogram" a 100/102 > into a 200 and vice-versa by following the initial programming steps > and doing a "wipe and reload". At least, you can on the REX classic. > I've never done it on REX# so check the wiki pages. > > -Josh > > On Thu, Jul 8, 2021 at 2:55 PM Bill Miranda <[email protected]> > wrote: > > > > Is REX module interchangeable between model 100 and model 102? > > > > Thanks! > > > > Bill > -- Tom Wilson [email protected] (619)940-6311
