I have some files regarding Remote Disk. https://1drv.ms/u/s!AgRHXuUu57Cegj4Vn_7bAe1WIUKh?e=PafeNL ________________________________ From: M100 <[email protected]> on behalf of Greg Swallow <[email protected]> Sent: Saturday, September 4, 2021 9:07 PM To: Brian K. White <[email protected]> Subject: Re: [M100] Tandy Remote Disk diskette(s)
Very cool bring. I'll get the manual scanned and tape files on to something this weekend. God Bless, GregS <>< Sep 4, 2021 1:55:51 PM Brian K. White <[email protected]>: > I was able to execute the RMDISK1.CMD file in sdltrs. I still can't figure > out a combination of steps to create a disk image that sdltrs will boot from, > but, it let's you just boot to the main rom with no disk and then you can hit > Alt+X and it lets you browse to select a .cmd file, and it worked. The > program runs and shows the "awaiting for command from model 100" screen. So, > I think that means the extracted RMDISK1.CMD file is good, and it's really > all you need. > > On 9/4/21 3:50 PM, Brian K. White wrote: >> I've captured a disk image with FluxEngine, but I don't know what you can do >> with it yet. >> It's not a JV1 or JV3 or DMK file, but JV1 is apparently such a simple >> format that maybe this works as a JV1 file by just renaming it. >> >> ... ok, think the disk is supposed to be a bootable TRSDOS disk, but I was >> not able to boot the disk image with sdltrs >> >> However I was able to open it with trstools and extract the RMDISK1.CMD file. >> that would be RMDISK1/CMD in trsdos or ldos >> >> You should be able to take that file and stick it on any disk and run it. >> >> https://drive.google.com/drive/folders/1V_0imPo_JmF8xKWGJLOlfmnWdGPz5k-A >> > > -- > bkw
