Hello Steve! Thank you for the bugfix relese of REX# 22
Upde went with one small issue:
When i use your Instructions here:
Instructions
============
1. Make sure REX# is in default state, meaning
a. REX# Manager is not running (use CNTL-X to remove hooks, or F7 from
REXMGR)
b. Power cycle once, to ensure the default memory blocks are selected
c. Optionally, cold-rebooting the laptop after a power cycle ensures a
clean state.
2. Load RX#Ux.DO via serial transfer, or TPDD transfer.
3. RUN RX#Ux.DO in BASIC.
RX#Ux.DO allows you to choose to LOAD a REX# application (24kB file)
4. Configure RX#Ux.DO to do the following:
a. indicate YES to "Load REX code:" using space bar/enter
b. execute these choices by pressing Y.
5. The loader will load up the machine language routine, and begin to execute
6. To LOAD a fresh REX# Manager application, RX#Ux.DO accesses a remote TPDD
server to get the binary 24k file.
RX#Ux.DO contains it's own TPDD access routines, and does not need a DOS.
a. Ensure a TPDD server is ready to go with the source file as needed.
ex. RX#_12.BR
b. When asked for a NAME, Supply the correct file name (6 characters, no
extension, case sensitive) ex RX#_12
File extension is automatically set to .BR
7. Let the program run
You should see a counter counting up from zero to 24,576 bytes
When complete, REX# should have a fresh software load installed.
The directory should be unchanged, and the saved images should be intact.
In the Step 6. its not clear, which file should be loaded: RX#_12.BR, RX#_22.BR
or RX#_N2.BR.
First i choosed RX#_22.BR because i was confused with Version 22. After REX was
not accesable anymore, i updated it again with RX#_N2.BR
Maybe the instructions should be updated to clarify on which machines, which
file should be used.
Thanks!
--
Kind regards /
Mit freundlichen Grüßen
ExPLIT IT Solutions
Pawel Radomychelski
-----Original Message-----
From: Stephen Adolph <[email protected]>
Reply-To: [email protected]
To: [email protected]
Subject: [M100] REX#/REXCPM release 2.2 is on the wiki
Date: 11/05/23 04:23:32
Sorry for the huge delay.
I've updated the REX# wiki to post the Release 2.2 file sets for REXCPM
and REX#.
Let me know if anyone has any trouble.
cheers
Steve
https://bitchin100.com/wiki/index.php?title=REXCPM#Software
https://bitchin100.com/wiki/index.php?title=REXsharp#Software
signature.asc
Description: This is a digitally signed message part
