Hi Pawel, I included a note in the instructions.
'x' is a variable: 1,2 or N - depending on your model hope that addresses the concern. Thanks Steve On Sunday, November 5, 2023, Pawel Radomychelski | ExPLIT < exp...@mailbox.org> wrote: > Hello Steve! > > Thank you for the bugfix relese of REX# 22 > > Upde went with one small issue: > > When i use your Instructions here: > > Instructions > ============ > 1. Make sure REX# is in default state, meaning > a. REX# Manager is not running (use CNTL-X to remove hooks, or F7 from > REXMGR) > b. Power cycle once, to ensure the default memory blocks are selected > c. Optionally, cold-rebooting the laptop after a power cycle ensures a > clean state. > 2. Load RX#Ux.DO via serial transfer, or TPDD transfer. > 3. RUN RX#Ux.DO in BASIC. > RX#Ux.DO allows you to choose to LOAD a REX# application (24kB file) > 4. Configure RX#Ux.DO to do the following: > a. indicate YES to "Load REX code:" using space bar/enter > b. execute these choices by pressing Y. > 5. The loader will load up the machine language routine, and begin to > execute > 6. To LOAD a fresh REX# Manager application, RX#Ux.DO accesses a remote > TPDD server to get the binary 24k file. > RX#Ux.DO contains it's own TPDD access routines, and does not need a > DOS. > a. Ensure a TPDD server is ready to go with the source file as needed. > ex. RX#_12.BR > b. When asked for a NAME, Supply the correct file name (6 characters, > no extension, case sensitive) ex RX#_12 > File extension is automatically set to .BR > 7. Let the program run > You should see a counter counting up from zero to 24,576 bytes > When complete, REX# should have a fresh software load installed. > The directory should be unchanged, and the saved images should be > intact. > > > > In the Step 6. its not clear, which file should be loaded: RX#_12.BR, > RX#_22.BR or RX#_N2.BR. > > First i choosed RX#_22.BR because i was confused with Version 22. After REX > was not accesable anymore, i updated it again with RX#_N2.BR > > Maybe the instructions should be updated to clarify on which machines, which > file should be used. > > > Thanks! > > > -- > > Kind regards / > Mit freundlichen Grüßen > > ExPLIT IT Solutions > Pawel Radomychelski > > > > -----Original Message----- > *From*: Stephen Adolph <twospru...@gmail.com > <stephen%20adolph%20%3ctwospru...@gmail.com%3e>> > *Reply-To*: m...@bitchin100.com > *To*: m...@bitchin100.com > *Subject*: [M100] REX#/REXCPM release 2.2 is on the wiki > *Date*: 11/05/23 04:23:32 > > Sorry for the huge delay. > I've updated the REX# wiki to post the Release 2.2 file sets for REXCPM > and REX#. > Let me know if anyone has any trouble. > > cheers > Steve > > https://bitchin100.com/wiki/index.php?title=REXCPM#Software > https://bitchin100.com/wiki/index.php?title=REXsharp#Software > > >