Thanks for the response! I do not know if it has or not. I will dismantle it and check. While I have it cracked open is there anything else I should go ahead and verify/check or be aware of?
Thanks! Josh Carlson > > > > Date: Fri, 5 Jul 2024 15:49:24 -0400 > From: Josh Malone <[email protected]> > To: [email protected] > Subject: Re: [M100] Model 200 power issue > > I seem to recall seeing this symptom (basically, a failure to turn off > properly) when there were issues with the memory power battery or the 5v > power rail itself. Has the memory battery been replaced on this unit? > > -Josh > > On Fri, Jul 5, 2024 at 3:47?PM A Guy <[email protected]> wrote: > > > Hello everyone! > > > > Long time lurker. I finally got a Tandy 200 (bday present :)). It is in > > really great condition and powers on and seems to work fine. HOWEVER, > when > > you hit the power button it "turns off" but leaves two single pixel tall > > lines across the display. The position changes each time. And you can > hear > > a faint rapid clicking noise coming from the unit. And it takes several > > presses of the power button to get it to turn back on correctly. > > > > Any idea what the issue is? Is this just an old cap problem and I need to > > recap it? I wanted to get some input before I dove into it. > > > > Thanks! > > > > Josh Carlson > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.bitchin100.com/private.cgi/m100-bitchin100.com/attachments/20240705/d20c2a00/attachment-0001.htm > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > M100 mailing list > [email protected] > http://lists.bitchin100.com/listinfo.cgi/m100-bitchin100.com > > > ------------------------------ > > End of M100 Digest, Vol 163, Issue 2 > ************************************ >
