Le Sunday 08 June 2008 21:28:27 Erik Andrén, vous avez écrit : > Hi, > > 2008/6/8 Jos <[EMAIL PROTECTED]>: > > Oh, ok sorry I misunderstand your answer > > You can't do anything for flipping image on s5k83a? It's not possible to > > manually flip the image upside down with pixel processing or whatever? > > I don't know a lot of things about this kind of driver > > You could in theory flip the image in another stage in the post processing > of the image. The cpu penalty would be severe though and should only be > seen as a last resort. I currently have no plans of implementing such a > feature but patches are always welcome. > > It would be much better if one could find the correct register in the > sensor (or in the m5602 if it exists). > > Regards, > Erik
It is not so 'timeconsumming to v flip the buffer. Look when you add bayerdecode functions, it have heavy buffer read&write. Also, the bayer decode may flip (H/V) the destination buffer without lost. With my cam I have a small utility to view stream from the cam. With basic color/size/flip controls. Maybe you can determine if an URB is sent speciafically for this function? Franck ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
