On Tue, Nov 11, 2008 at 15:39, Lukáš Karas <[EMAIL PROTECTED]> wrote: > > ______________________________________________________________ >> Od: [EMAIL PROTECTED] >> Komu: > > CC: [email protected] >> Datum: 11.11.2008 14:53 >> Předmět: Re: [M560x-driver-devel] Doesn't work on an acer aspire 9410z >> >>On Tue, Nov 11, 2008 at 14:12, MulX <[EMAIL PROTECTED]> wrote: >>> On Tue, Nov 11, 2008 at 13:32, Erik Andrén <[EMAIL PROTECTED]> wrote: >>>> 2008/11/11 MulX <[EMAIL PROTECTED]>: >>>>> Hi ! >>>>> >>>>> This driver don't work on an Acer Aspire 9410z >>>>> I have run this one : svn co >>>>> https://m560x-driver.svn.sourceforge.net/svnroot/m560x-driver >>>>> m560x-driver >>>>> Then I compile the m5602 branches, no error. >>>>> Loading module no error, but the webcam can't be used. >>>>> >>>>> The green led is powered on when the module is loaded and it's not >>>>> powered off when the module is unloaded. >>>>> >>>>> I use cheese for test the webcam >>>>> >>>>> I have loaded the module with debug=0xff and the dmesg output is >>>>> available here : http://mulx.net/dmesgali.txt >>>>> >>>>> lsusb output : >>>>> Bus 005 Device 009: ID 0402:5602 ALi Corp. Video Camera Controller >>>>> >>>>> I am using Ubuntu Hardy/Intrepid/Jaunty. >>>>> >>>>> If you have an idea :-) >>>>> >>>>> I can do all test, even if it's dangerous for my webcam >>>>> The webcam_bison driver found here work with Microsoft Windows XP : >>>>> ftp://ftp.work.acer-euro.com/notebook/aspire_9410/driver/webcam_bison_5.0.0.5.zip >>>>> >>>>> >>>>> I try to compile the m5603* driver but I get a compile error ... >>>>> >>>>> >>>>> I think I have an m5603 because the BisonCam.inf in the windows driver >>>>> is talking about that and sensors VGA OVT - >>>>> 7640/7648/7649,MT9V011(MI360),HV7131R >>>>> >>>>> >>>> Hi, >>>> You have a m5602 webcam using the s5k83a sensor. >>>> The log you sent looks quite good. >>>> Does it work if you use ekiga or kopete? >>>> >>>> Regards, >>>> Erik >>>> >>>> >>> >>> Yeah =) >>> It work with ekiga, I don't have kopete >>> >>> And the cam work with gstreamer-properties. >>> >>> So it's a new bug for cheese. >>> >>> Thanks you >>> MulX >>> >> >>Oh! >> >>New problem, if I rotate the cam, sometime the cam get a new USB >>adress and the m5602 module seems to be a little upset. > > Hi. > Sorry, what you mean exactly with "new USB address" ? > Camera change position on lsusb output?! >
When I start my computer the cam is on Bus 005 Device n with the lsusb and some time when I rotate the cam the cam is disconnected/reconnected and lsusb say the cam is now at Bus 005 Device n+1 It's repported on launchpad to this bug: 289697 (https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/289697) This is just the Device number never the bus number > By the way, I added experimental support for correct image rotation > to s5k83a sensor code (only in m5602 branche). Work this for you? > Have you top dirrection on real too top on image, if you flip camera back > side? I don't try to view the image, but I have see in dmesg a message to saying the cam have rotate (when the usb is not disconnected during rotation) I try this when I have finish my work ;) Regards, Aymeric ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ M560x-driver-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/m560x-driver-devel
