Hi Nate, I have waited for around one and a half hours now and still it has got stuck after that statement.
What do you suggest? regards- Chaitali --- Nathan Binkert <[EMAIL PROTECTED]> wrote: > How long did you wait? Did you compile your own > kernel? There is a > pretty long period of time after this statement that > is sucked up by some > delay code that needs a patch depending on the > kernel version. > > Nate > > > > Hi, > > > > I would also like to run my own program in M5 2.0 > FS mode for multiple cores. When I am running my > program with 4 cores, the program is not running to > completion, but with 2 cores it executes > successfully. I am giving the output from the m5term > below - > > > > "SMP starting up secondaries. > > Slave CPU 1 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018400 my_rpb_phys 18400 > > Slave CPU 2 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018680 my_rpb_phys 18680 > > Slave CPU 3 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018900 my_rpb_phys 18900 > > Brought up 4 CPUs > > SMP: Total of 4 processors activated (8000.15 > BogoMIPS). > > NET: Registered protocol family 16 > > EISA bus registered > > pci: enabling save/restore of SRM state > > SCSI subsystem initialized > > srm_env: version 0.0.5 loaded successfully > > Installing knfsd (copyright (C) 1996 > [EMAIL PROTECTED]). > > Initializing Cryptographic API > > rtc: Standard PC (1900) epoch (1900) detected > > Real Time Clock Driver v1.12 > > Serial: 8250/16550 driver $Revision: 1.90 $ 5 > ports, IRQ sharing disabled > > ttyS0 at I/O 0x3f8 (irq = 4) is a 8250 > > loop: loaded (max 8 devices) > > Using anticipatory io scheduler > > nbd: registered device at major 43 > > sinic.c: M5 Simple Integrated NIC driver > > ns83820.c: National Semiconductor DP83820 > 10/100/1000 driver. > > eth0: ns83820.c: 0x22c: 00000000, subsystem: > 0000:0000 > > eth0: enabling optical transceiver > > eth0: ns83820 v0.20: DP83820 v1.3: > 00:90:00:00:00:01 io=0x09000000 irq=30 f=sg > > Uniform Multi-Platform E-IDE driver Revision: > 7.00alpha2 > > ide: Assuming 33MHz system bus speed for PIO > modes; override with idebus=xx > > PIIX4: IDE controller at PCI slot 0000:00:00.0 > > PIIX4: chipset revision 0 > > PIIX4: 100% native mode on irq 31 > > ide0: BM-DMA at 0x8400-0x8407, BIOS settings: > hda:DMA, hdb:DMA > > ide1: BM-DMA at 0x8408-0x840f, BIOS settings: > hdc:DMA, hdd:DMA > > hda: M5 IDE Disk, ATA DISK drive > > hdb: M5 IDE Disk, ATA DISK drive > > ide0 at 0x8410-0x8417,0x8422 on irq 31 > > hda: max request size: 128KiB > > hda: 163296 sectors (83 MB), CHS=162/16/63, > UDMA(33) > > hda: hda1 > > hdb: max request size: 128KiB > > hdb: 4177920 sectors (2139 MB), CHS=4144/16/63, > UDMA(33) > > hdb: unknown partition table > > scsi0 : scsi_m5, version 1.73 [20040518], > dev_size_mb=8, opts=0x0 > > Vendor: Linux Model: scsi_m5 Li Rev: > 0004 > > Type: Direct-Access ANSI > SCSI revision: 03 > > SCSI device sda: 16384 512-byte hdwr sectors (8 > MB) > > SCSI device sda: drive cache: write back > > sda: unknown partition table > > Attached scsi disk sda at scsi0, channel 0, id 0, > lun 0 > > mice: PS/2 mouse device common for all mice > > NET: Registered protocol family 2 > > " > > > > The console always seem to hang after reaching > this particular line - > > > > "NET: Registered protocol family 2" > > > > I am defining multiple cores in the fs.py file as > mentioned below - > > > > "system = makeLinuxAlphaSystem(mem_mode, bm[0]) > > system.cpu = [AtomicSimpleCPU(), > AtomicSimpleCPU(), AtomicSimpleCPU(), > AtomicSimpleCPU()] > > system.cpu[0].connectMemPorts(system.membus) > > system.cpu[0].mem = system.physmem > > system.cpu[1].connectMemPorts(system.membus) > > system.cpu[1].mem = system.physmem > > system.cpu[2].connectMemPorts(system.membus) > > system.cpu[2].mem = system.physmem > > system.cpu[3].connectMemPorts(system.membus) > > system.cpu[3].mem = system.physmem > > root = Root(clock = '1GHz', system = system) > > " > > > > Any help in this regard is highly appreciated. > > > > -Regards > > Chaitali > > > > > > "xiaojun.chen" <[EMAIL PROTECTED]> > wrote: > > Hi,m5-users�� > > When I run m5 with 4-over core(6,8,or more),I > always got the warning msg: > > "warn: clear IPI for CPU=0, but NO IPI " > > and this msg seemed like to repeat ceaselessly. > > > > On the console, the output msg stoped with : > > "SMP starting up secondaries. > > Slave CPU 1 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018400 my_rpb_phys 18400 > > Slave CPU 2 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018680 my_rpb_phys 18680 > > Slave CPU 3 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb > FFFFFC0000018900 my_rpb_phys 18900 > > Slave CPU 4 console command START > > SlaveCmd: restart FFFFFC0000310020 > FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb " > > It looks like that just 4 cpus were started up,and > warning msg appeared when starting next cpu up. > > > > Is the warning caused by the kernel?Perhaps I > should recompile the 2.6.8.1 kernel with some > special options checked. > > Anybody have this warning before now and how to > resolved it ? > > > > Thanks and Best Regards! > > > > > > ����������������xiaojun.chen > > [EMAIL PROTECTED] > > ��������������������2007-01-05 > > _______________________________________________ > > m5-users mailing list > > [email protected] > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users > > > > > > --------------------------------- > > Check out the all-new Yahoo! Mail beta - Fire up a > more powerful email and get things done faster.> _______________________________________________ > m5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users ____________________________________________________________________________________ Sucker-punch spam with award-winning protection. Try the free Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/features_spam.html _______________________________________________ m5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
