Hi Dafang, It's a little bit weird, I think it's something about your network setup. If you use the maas-dhcp package to enable the DHCP support by MAAS, that's should not append.
Did you use the NIC private interface of Virtual box? For my own, I did 2 setups, one on virtual machine (vmware fusion) and one on bare metal. For the the virtual setup, my MAAS server has 2 NIC card, one for the outside (manage by the vmware dhcp) and an other one configured in private network. The MAAS server is configured on the private NIC private interface. To reconfigure this do: $ sudo dpkg-reconfigure maas > $ sudo dpkg-reconfigure maas-provision Also my MAASlave vm only use a private nic card. I also enable the ipv4 forward on the kernel of the MAAS server and add 2 iptables rule to give internet access to the MAASlave like so: $ sudo iptables -t nat --append POSTROUTING --out-interface eth0 -j > MASQUERADE $ sudo iptables --append FORWARD --in-interface tun0 -j ACCEPT $ sudo echo 1 > /proc/sys/net/ipv4/ip_forward $ sudo echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf $ sudo sysctl -p net.ipv4.ip_forward = 1 On my bare metal setup I also let MAAS manage my DHCP. Hope it can help because at the moment I have no clue for your issue. Cheers! On Fri, May 4, 2012 at 6:31 PM, Dafang Zhang <[email protected]> wrote: > Thanks a lot for the tip, Sebastien! This indeed did the trick for the > password issue! Any idea how to automate the "Continue without a default > route" prompt? There's another post for the exactly the same question but > no response to inquiry yet. > http://ubuntuforums.org/showthread.php?t=1868773 > > Best Regards, > Dafang > >
-- Mailing list: https://launchpad.net/~maas-devel Post to : [email protected] Unsubscribe : https://launchpad.net/~maas-devel More help : https://help.launchpad.net/ListHelp
