In a message dated 13/9/03 8:27:09, [EMAIL PROTECTED] writes: << I've got a 9500/120 which I picked up a 200 processor for to upgrade it. Not
done this before, but having got the case off and figured out how to get at the processor card, I managed to swap it over without too many problems. However ... having put everything back together, all I get when I try to power it up is a click. >> Hi it sounds like the cards not properly seated in the slot. i've had the same problem in the past i got round it by rocking the card in by applying pressure to the front and rear of the card alternately. this slot on the 9500 is really stiff... mark s -- Mac UK is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Mac UK list info: <http://lowendmac.com/lists/mac-uk.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/mac-uk%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
