Hi: We are working on an LTFS Beta project. We are trying to mount a tape drive and restore files media files that were downloaded from Video Camera to PC to Tape Drive.
The software requirements we have are below. Yesterday, I installed an ATTO ExpressSAS H680 HBA into a Mac G5 running Mac OS X 10.5.6 As part of the installation I also installed MacFuse 2.0.3.2 and ICU 4.0.1 Then I installed ltfs-1.0.1-201008130.tar.gz. I have made a directory /mnt/lto5 When i run the following: $ ltfs /mnt/lto5 -o devname=0 I get the following output: administrators-mac-pro:~ Admin$ ltfs /mnt/lto5 -o devname=0 LTFS14000I LTFS starting, LTFS version 1.0.1 (201008130), log level 2 LTFS14064I Sync type is "unmount" LTFS12158I Opening a device through iokit driver (0) LTFS12118I Drive identification is 'ULT3580-TD5 ' LTFS12162I Vendor ID is IBM LTFS12159I Firmware revision is A3K6 LTFS12160I Drive serial is 1068002299 LTFS11005I Mounting the volume LTFS12015I Attempting to load the medium LTFS11031I Volume mounted successfully kextload: /Library/Filesystems/fusefs.fs/Support/fusefs.kext loaded successfully administrators-mac-pro:~ Admin$ mount_fusefs: failed to mount /mnt/ lto5@/dev/fuse0: Operation not permitted Any ideas on how to fix this problem? -- You received this message because you are subscribed to the Google Groups "MacFUSE" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/macfuse?hl=en.
