I think what you want to do is this. Go to the setup page of Linksys  
B and turn off DHCP. Give it an ip address. If your Linksys A ' ip is  
192.168.1.1 make the last number of the digits a 2. So you would give  
Linksys b 192.168.1.2. Remember that address so you can get to its  
configuration page if needed after you're set up. Now plug one of the  
4 or 5 ethernet ports from Linksys A in to one of the Linksys B's  4  
or 5 ports. Avoid plugging it in to any other port on Linksys B (like  
wan, internet, possibly your uplink port as well.) This takes up a  
port on B, but gets done what I think you are wanting to do. This  
should turn your B router in to just a pass through. No crossover is  
needed.

Brian O'Neal


On Jan 18, 2006, at 9:36 AM, Dan Crutcher wrote:

I have two computers in a room that has only one Ethernet connection  
to my LAN. I want both computers to be connected to the LAN. I also  
happen to have have an unused Linksys cable/DSL router, which I'll  
call Linksys B.

If I plug in the Linksys B router, run the Ethernet cable to one of  
its ports and run Ethernet cables from two other of the Linksys B  
ports to the two computers in the room, will they be able to access  
the network?

Does it matter which Linksys B ports I use for either the cable from  
the network to the router, or for the two cables to the two  
computers? The Linksys has 6 ports: one labeled "WAN," one labeled  
"UPLINK" and four unlabeled ports.

Does it matter that the LAN that is being connected to is currently  
being provided NAT services by an identical Linksys router, which  
I'll call Linksys A.

Do I have to access the Linksys' web interface -- on either A or B --  
to change any configuration settings? (Such as turning off NAT on  
Linksys B?)

Essentially, I want Linksys B to serve as a "dumb" router on the  
network to give me more Ethernet access points in that one room.

Thanks.

Dan




| The next meeting of the Louisville Computer Society will
| be January 24  at Pitt Academy, 6010 Preston Highway.
| The LCS Web page is <http://www.kymac.org>.
| List posting address: <mailto:macgroup at erdos.math.louisville.edu>
| List Web page: <http://erdos.math.louisville.edu/macgroup>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://www.math.louisville.edu/pipermail/macgroup/attachments/20060118/5ebe2dcc/attachment.html
 

Reply via email to