I am trying to flash eMMC of BeagleBone Green with Machinekit image ...
without success :(
I tried different images (7.10 and 8.5), different scripts in
/boot/uEnv.txt:
cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-bbgw.sh
and
cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-bbgw.sh
I am using serial debug, where I can see error messages:
http://pastebin.com/6Jdysgip
I also found similar issue described:
https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!msg/beagleboard/l1GtJPIRvHU/iIP8ab_yBAAJ
It boots from sdcard though, but there is /dev/mmcblk0 only and the
message is similar:
...
[ 0.790742] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.802412] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8)
status -22
[ 0.809695] pinctrl-single 44e10800.pinmux: could not request pin 21
on device pinctrl-single
Loading, please wait...
[ 0.902088] mmc1: unrecognised EXT_CSD revision 7
[ 0.907071] mmc1: error -22 whilst initialising MMC card
fsck: error 2 (No such file or directory) while executing fsck.ext4 for
/dev/mmcblk0p1
fsck exited with status code 8
[ 8.801104] systemd-fsck[144]: rootfs: clean, 80513/217728 files,
446677/870144 blocks
[ 12.431393] libphy: PHY 4a101000.mdio:01 not found
[ 12.436434] net eth0: phy 4a101000.mdio:01 not found on slave 1
Debian GNU/Linux 8 beaglebone ttyO0
Machinekit Debian Image 2016-06-05
Support/FAQ: http://www.machinekit.io/
default username:password is [machinekit:machinekit]
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
