Hi, You don't need an eeprom (you don't need a cape) to be able to use the signals from P8 and P9. If your config is running a program that needs a eeprom, then I'd suggest trying another config that doesn't require an eeprom be programmed and present.
Jeff On Thursday, September 1, 2016 at 6:30:18 PM UTC-7, joe2456001 wrote: > > HI guys > I was trying to use bbb and run machinekit to send signals to a polulu > driver, to drive a stepper motor. This way the signal will be coming from > pru, i don't want to get a cape for this. When i choose a config fie now > the bbb is search for the eeprom of the cape which i don't have.Is this > possible? > Any suggestions will be appreciated. > Thanks > Best > Jason > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
