Re: [Machinekit] pyVCP RPM Meter

[schoone...@btinternet.com]

On 25/09/16 20:55, Sag ich Dir nich wrote: 4. then i created a new file in the machine directory and named it "spindle_to_pyvcp.hal" in which i copied "net spindle-rpm-filtered => pyvcp.spindle-speed". i am assuming  that "net spindle-rpm-filtered" is the signal No good assuming, if you didn't create it, it does not exist so i tried using other pins but everytime i get an error message "pin does not exist". The correct signal is annotated in your hal file # For display in pyvcp net smoothed_rpm spindle-rpm-filter.out hal_xinit:171 HAL error: duplicate component name 'hal_manualtoolchange' but i havent touched it so why would it duplicate then? You are loading it right at the start of cramps.hal loadusr -W hal_manualtoolchange and loading it again by including HALFILE = axis_manualtoolchange.hal in your ini file -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.