Hi, so i want to implement manual overrides for spindle and feed from 0-150%. First i searched in the web for an example and i found some posts about looking a the file "ReadTemp.py", so i looked at it and found a rather long list of Temp/Resistance and Alpha values (first of all what is the Alpha value for?). The resistance values are single Ohm right? If so, 0% must be 0 or 100.000 for a 100kohm Pot right? ADC value to Temperature conversation may be removed as i need %.
So all i see is a very long list of values (in my case 150 lines or even more for 0-150%) and i am thinking, isnt it possible to make it like floating values (if floating means what i think it means) so it calculates the % value itself? as input pins i want to use the Thermistor inputs thanks -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.