thanks for the files but i am not able to find any "pwmgen" and "dir" lines in your config (btw i have a Cramps cape)
Am Freitag, 6. Januar 2017 15:01:47 UTC+1 schrieb Marius Alksnys: > > Take a look at my sample Machinekit configs for Furaday Cape for > BeagleBone. You can download them following a link at the end of the > product page: > http://www.robotise.lt/hardware-for-beaglebone/8-furaday-cape-1-2.html > > I am using PWM and DIR on many machines already. > > > By the way these are not syntax / logic correct and will not work: > setp hpg.pwmgen.00.dir bb_gpio.p8.out-16 > > It should be either > setp some-component.some-real-parameter 123.456 > setp some-component.some-bool-parameter 1 > setp some-component.some-bool-parameter true > > or > > net my-net some-component.some-pin other-comp.pin > > > When you want to know list of pins, parameters, components, etc., use > either: > halcmd show pin some* > > or use halshow with GUI interface and browse the tree > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
