Yes, there is enough room for a few additional attendees. Am Mittwoch, 26. April 2017 22:41:28 UTC-5 schrieb Brian Schousek: > > Is there plenty of room at the facility if I decide Saturday morning to > make the drive down from Minneapolis? Sounds like a very interesting agenda. > > On Wednesday, April 26, 2017 at 1:27:23 AM UTC-5, Alexander Rössler wrote: >> >> Hello everyone, >> >> Here is the updated agenda with links to the YouTube/Hangouts on Air >> event. To make sure you do not miss your favorite talk, please use the >> reminders you can set on YouTube. >> >> As a warmup and introduction to Machinekit I recommend to watch the >> "Session 1, Machinekit Introduction" from the Machinekit Europe meeting >> last year kinldy provided by Frederic from the ElectroLab Hackerspace: >> https://youtu.be/OVVGdQnz5Ts >> >> *Agenda for Saturday, April 29th:* >> >> 9:00 am - doors open >> >> 9:30 am - "Current Status of Machinetalk" by Alexander Rössler >> https://www.youtube.com/watch?v=8qzKLiO2chU >> >> 10:30 am - "C3000 and Emco 120P Retrofit" project by Frederic Rible >> https://www.youtube.com/watch?v=zVUMC1mdQKg >> >> 11:30 am - Tom M - MPCNC + FreeCAD Path work bench >> https://www.youtube.com/watch?v=R7RVRys4uiA >> >> 12:00 am - 1:00 pm lunch break >> >> 1:30 pm - "Getting Started with Machinekit on SoC+FPGA" by Charles >> Steinkuehler >> https://www.youtube.com/watch?v=veM83KCytuQ >> >> 2:30 pm - "The Arcus 3D M2 Mixed Material Filament Printer" by Daren >> Schwenke >> https://www.youtube.com/watch?v=x2tNMsqMUDo >> >> 3:30 pm - "Machinekit at PMCS Stone" by Daniel Skrlin >> https://www.youtube.com/watch?v=uT-tAweP21U >> >> 4:00 pm - "Overview of Machinekit Multicore" by Alex and Charles, >> presentation and write-up provided by Mick >> https://www.youtube.com/watch?v=vHJ_s6ZoW4I >> <https://www.youtube.com/watch?v=vHJ_s6ZoW4I> >> >> Afterward: drinks and food at a local brewery. >> >> -- >> Alexander >> >> Am Sonntag, 23. April 2017 18:16:20 UTC+2 schrieb Alexander Rössler: >>> >>> Hi folks, >>> >>> The Machinekit Meetup is approaching quickly, and an update the on the >>> program is more than overdue. >>> >>> I have already a collected a few topics on the announcement thread, but >>> we have still a few slots left for (remote) talks on Saturday. If you want >>> to give a short talk about any Machinekit related topic, please go ahead on >>> responding to this thread or via PN to me. >>> >>> You can also attend the meetup remotely via Google Hangouts. The talks >>> will be shared on Google+ via the user Tom Tormach >>> <https://plus.google.com/u/1/107520884648961863037> >>> >>> Below you'll find info on: >>> >>> - Program >>> - Subjects >>> - Location >>> >>> *Program* >>> >>> *Saturday, April 29th* >>> >>> - doors open at 9:00 >>> - morning program >>> - Tormach kindly provides coffee and lunch >>> - afternoon program >>> - end of the day at 17:00 >>> >>> Afterward, we'll probably head over to the brewery next door >>> <http://www.octopibrewing.com/welcome> for food, drink, to chat up with >>> each other, to share projects and to have a good time. >>> >>> *Sunday, April 30th* >>> >>> - doors open at 9:00 >>> - starting at 9:00 - open discussion about the future of Machinekit >>> - end of the program 12:00 >>> >>> *Subjects* >>> >>> Scheduling of the talks is currently in progress, and you will be >>> informed shortly about the exact times and hangouts. >>> It's our goal to get a mix of talks (not too long), interspersed with >>> your input and ideas. So if you have a superb idea, or want to discuss a >>> topic, give a shout. >>> >>> *Confirmed topics:* >>> >>> - Daren will present the Arcus 3D M2 - Mixed material filament >>> printer >>> >>> <https://hackaday.io/project/20763-arcus-3d-m2-mixed-material-filament-printer> >>> - Frederic will talk about the C3000 and Emco 120P retrofits >>> - Alex will discuss "The Current Status of Machinetalk" and show off >>> a QtQuickVcp-based UI for a commercial product >>> - Charles will about the "FPGA and SoC" stuff with Machinekit >>> >>> *Furthermore:* >>> >>> - There will be lots of Tormach machines to watch in the Tormach >>> factory. >>> - Bas may give a remote talk about his Python findings. >>> - Tom might talk about his MPCNC project. >>> - You might want to bring some project or machine to show everybody >>> else. >>> >>> >>> *Location* >>> >>> Tormach kindly provides the venue for the Machinekit Meetup. >>> >>> The exact address is: >>> 1071 Uniek Dr, Waunakee, WI 53597, USA >>> >>> I will notify you if there any updates. >>> >>> I'm looking forward to meeting you there. >>> Alexander >>> >>>
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
