In case you have missed the meetup please don't forget that you can still watch all live streams via the links on YouTube.
Am Mittwoch, 26. April 2017 01:27:23 UTC-5 schrieb Alexander Rössler: > > Hello everyone, > > Here is the updated agenda with links to the YouTube/Hangouts on Air > event. To make sure you do not miss your favorite talk, please use the > reminders you can set on YouTube. > > As a warmup and introduction to Machinekit I recommend to watch the > "Session 1, Machinekit Introduction" from the Machinekit Europe meeting > last year kinldy provided by Frederic from the ElectroLab Hackerspace: > https://youtu.be/OVVGdQnz5Ts > > *Agenda for Saturday, April 29th:* > > 9:00 am - doors open > > 9:30 am - "Current Status of Machinetalk" by Alexander Rössler > https://www.youtube.com/watch?v=8qzKLiO2chU > > 10:30 am - "C3000 and Emco 120P Retrofit" project by Frederic Rible > https://www.youtube.com/watch?v=zVUMC1mdQKg > > 11:30 am - Tom M - MPCNC + FreeCAD Path work bench > https://www.youtube.com/watch?v=R7RVRys4uiA > > 12:00 am - 1:00 pm lunch break > > 1:30 pm - "Getting Started with Machinekit on SoC+FPGA" by Charles > Steinkuehler > https://www.youtube.com/watch?v=veM83KCytuQ > > 2:30 pm - "The Arcus 3D M2 Mixed Material Filament Printer" by Daren > Schwenke > https://www.youtube.com/watch?v=x2tNMsqMUDo > > 3:30 pm - "Machinekit at PMCS Stone" by Daniel Skrlin > https://www.youtube.com/watch?v=uT-tAweP21U > > 4:00 pm - "Overview of Machinekit Multicore" by Alex and Charles, > presentation and write-up provided by Mick > https://www.youtube.com/watch?v=vHJ_s6ZoW4I > <https://www.youtube.com/watch?v=vHJ_s6ZoW4I> > > Afterward: drinks and food at a local brewery. > > -- > Alexander > > Am Sonntag, 23. April 2017 18:16:20 UTC+2 schrieb Alexander Rössler: >> >> Hi folks, >> >> The Machinekit Meetup is approaching quickly, and an update the on the >> program is more than overdue. >> >> I have already a collected a few topics on the announcement thread, but >> we have still a few slots left for (remote) talks on Saturday. If you want >> to give a short talk about any Machinekit related topic, please go ahead on >> responding to this thread or via PN to me. >> >> You can also attend the meetup remotely via Google Hangouts. The talks >> will be shared on Google+ via the user Tom Tormach >> <https://plus.google.com/u/1/107520884648961863037> >> >> Below you'll find info on: >> >> - Program >> - Subjects >> - Location >> >> *Program* >> >> *Saturday, April 29th* >> >> - doors open at 9:00 >> - morning program >> - Tormach kindly provides coffee and lunch >> - afternoon program >> - end of the day at 17:00 >> >> Afterward, we'll probably head over to the brewery next door >> <http://www.octopibrewing.com/welcome> for food, drink, to chat up with >> each other, to share projects and to have a good time. >> >> *Sunday, April 30th* >> >> - doors open at 9:00 >> - starting at 9:00 - open discussion about the future of Machinekit >> - end of the program 12:00 >> >> *Subjects* >> >> Scheduling of the talks is currently in progress, and you will be >> informed shortly about the exact times and hangouts. >> It's our goal to get a mix of talks (not too long), interspersed with >> your input and ideas. So if you have a superb idea, or want to discuss a >> topic, give a shout. >> >> *Confirmed topics:* >> >> - Daren will present the Arcus 3D M2 - Mixed material filament printer >> >> <https://hackaday.io/project/20763-arcus-3d-m2-mixed-material-filament-printer> >> - Frederic will talk about the C3000 and Emco 120P retrofits >> - Alex will discuss "The Current Status of Machinetalk" and show off >> a QtQuickVcp-based UI for a commercial product >> - Charles will about the "FPGA and SoC" stuff with Machinekit >> >> *Furthermore:* >> >> - There will be lots of Tormach machines to watch in the Tormach >> factory. >> - Bas may give a remote talk about his Python findings. >> - Tom might talk about his MPCNC project. >> - You might want to bring some project or machine to show everybody >> else. >> >> >> *Location* >> >> Tormach kindly provides the venue for the Machinekit Meetup. >> >> The exact address is: >> 1071 Uniek Dr, Waunakee, WI 53597, USA >> >> I will notify you if there any updates. >> >> I'm looking forward to meeting you there. >> Alexander >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
