Re: [Machinekit] Where to request new features for Linuxcnc/Machinekit?

[schoone...@btinternet.com]

https://github.com/LinuxCNC/linuxcnc/issues/new I don't know how old the other link is, linuxcnc has moved into the 21st century and gone over to github now. On 16/07/17 16:05, Sag ich Dir nich wrote: Hello, i wanted to request a feature for Linuxcnc at https://sourceforge.net/p/emc/feature-requests/# but "Create Ticket" is greyed out because i have to be authorized by an admin.  Basically its about: Wrapped rotary, which should reset (or set home) everytime it goes from 359.999 to 0 or from 0 to 359.999 because it rotates back to homed 0 everytime i start a program (if the C axis has rotated about 200 revolutions, it s going to rotate back 200 revolutions). When the program is finished and i home the C axis and then start the program, it rotates maximum one revolution (depending on if the axis is at exactly 0 or 0.001). So basically copy "Wrapped rotary" and add the resetting funtion and call it for example "Wrapped rotary reset" so no other configuration is going to be influenced. It would be a dream if there would be also the function that it is going to rotate the shortest distance (from the current position) or if the commanded position is exactly 180 degrees away from the current position its going either cw or ccw.  -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.