Have worked with the backlash parameter and have observed no differences in the engravings. Thanks for the info and I will keep playing with the machine to see if there is a solution.
On Tuesday, August 15, 2017 at 5:38:04 PM UTC-7, Harley Engholm wrote: > > I am using Vectric Cut2d for my designs and have been using EMC2 post > processors for the g code creation. Everything works except that the > text on engravings are somewhat distorted, ie a straight line on the > bottom of an "L" is curved. Also circles are not complete, there is a very > small opening at the ends. All of the distortions seem to be the identical > when repeating an engraved word, so it seems that it may be more of a code > issue than a mechanical issue. I am wondering if anyone else has had this > problem and if there is a dedicated post processor for machinekit running > on a BBB. > > Harley > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
