On 31 Aug 2017, at 07:07, Pranav Pandey <[email protected]> wrote:
>> Your g-code file works with the extruder as 'E' axis, and Machinekit uses >> the 'A' after the X, Y and Z axes. >> Change your slicing printer settings so that Gcode flavor is "Mach3/LinuxCNC" > > This worked. I successfully imported the g-code into Axis UI, but when I > start executing the file an error pops up on the bottom saying " Unknown m > code used: M190". I have read Machinekit supports this m code and it > instructs the system to wait till the bed temperature reaches the target > temperature. Which configuration do you use? Please provide a link to the file in your own or the machinekit repo so we can see. > > I have attached the error snapshot here. I have used this plugin for Cura: > https://github.com/machinekoder/uni-print-3d-cura > > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > <Error_2.jpg> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
