Didn't visit the forum since a while friend. I struggled a bit through the process but was helped by Daren Schwenke. This worked for me after an effort of one week.
1. Fresh Install of latest machinekit from the wiki link mentioned on machinekit website. 2. Shared Internet connection to my BBB from my PC [Linux] After this I was still getting errors about 'fdm.config import velocity_extrusion as ve'. I did this next. 3. sudo apt-get update 4. sudo apt-get upgrade 5. sudo apt-get remove machinekit 6. sudo apt-get install machinekit-xenomai 7. sudo reboot 8. ./run.py [fabrikator-mini config directory] It worked without errors. Atleast now I am able to import g-code without any error, but still there are minor issues for which I am searching help. On Wednesday, September 6, 2017 at 1:14:06 AM UTC+5:30, machinen wrote: > > I am in somewhat similar situation to yours and I have few questions for > you: > > Were you able to upgrade your installation? Because the ready-made image > for BBB is quite old and when doing update/upgrade, the Machinekit > package(s) is(are) being kept back and it is because dependency error. The > same is when installing on new clean system flash (which are newer) by the > how to in Machinekit docs. > > Are you able to shutdown/poweroff/reboot your BBB with CRAMPS? I have the > Element14 BBB rev. C with CRAMPS 2.2 and I cannot shut it down completely. > The power on LED is still on and there are two LEDs on on CRAMPS and on the > right side of RIJ45 connector (bank of four LEDs) there is one LED faintly > blinking. Otherwise the BBB is turned off (I cannot SSH to it). I have to > manually shut the power down. Are you experiencing the same? > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
