Hi John, Might be a bit of a long shot, but you may have some luck sending a msg via http://www.cnczone.com/forums/members/phomann.html
Peter has been recently active on cnczone. Just put it out there just in case you haven't tried this route. Rob On Monday, October 9, 2017 at 11:39:17 AM UTC+11, John Dammeyer wrote: > > Hi, > I'm running the BBB with a Xylotex DB-25 Cape driving Servos. I've also > got a Homann Designs MODIO that could work as an MPG. The web site: > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ModIO > has drivers for LinuxCNC from 2012 which is a while ago now. > A search of MachineKit group doesn't have any hits for MODIO so I'm > wondering if it's possible to add this device to a Beagle running > MachineKit. > Thanks > John > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
