Thanks for reporting back.

It is good to get hands on confirmation of something that is theoretically obvious, but I dont have the hardware to test.

The documented 'raspbian' tagged route should work fine too now.


On 17/10/2017 20:54, Petros Makris wrote:
[SOLVED]

Hi. Fisrt of, thanks.

I did the following

1) Boot into clean 2017-07-05-raspbian-jessie
2) Added the machinekit repo as in machinekit.io
3) installed rt-preempt kernel via apt-get and reboot
4) changed distro tag in /etc/apt/sources.list.d/machinekit to 'jessie'
5) apt install machinekit machinekit-rt-preempt


And I managed to get machinekit installed and starting up.

(Although without much stress on the system I got 262ms jitter with median ~100ms!)


-Petros

On Monday, October 16, 2017 at 11:41:06 PM UTC+3, Petros Makris wrote:

    Hello,

    If booting to the latest 8.x jessie raspbian and following the
    instructions in machinekit.io <http://machinekit.io> you get

    (after installing the latest rt-preempt kernel)

    The following packages have unmet dependencies:

    machinekit-rt-preempt: Depends: machinekit
    (=0.1.1507881226-1mk.travis.master.git15d5a3f6) but is not going
    to be installed

    Any ideas?


--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected] <mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

--
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to