Sounds good.
Everything is possible if you have the patience ;-)
On 04/12/2017 01:56, Rob M wrote:
Ok,
A little update:
Updated my system,
bone-debian-7.11-machinekit-armhf-2017-01-22-4gb.img.xz, using apt-get
update, (had to use apt-offline as no net in the shed).
Ended up with:
*machinekit_0.1.1507308757-1mk.travis.master.gitdbf37ca2~1wheezy_armhf.deb
*which had the needed include files.
To get everything built (after installing the Qt libs & dev stuff and
libsub-dev) I built and installed included libusb and went on my way (
a few changes to the make file and one include file) and hidconfig &
hidcomp successfully natively compiled on the BBB. Wasn't as slow as
my 33 year old Radio Shack PC4 pocket computer (I think I got it when
I was 12), which is an rebranded 80's Casio.
I did a quick test of hidconfig, that operated as per normal once
perms were set for my usbdevice.
loaded up hidcomp via halrun and did a few tests and all appears to be
doing what it should, all the pins showed up via show pin.
I have only tested buttons and LEDs as that is all I have on my
device.....no LCD or other items.
As I'm a bit mentally stuffed, late night & early morning, I'll test
it on a live system on the morrow.
So far it has just been a test of Franks s\w to see if it will
compile, then load under halrun and toggle a few pins.
**
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
