Thanks got it fixed, finely after many months of working on machinekit with 
cramps i seem to have it running with machineface
yesterday got the full machineface with machinekit-client display working 
with the heaters and fans so till i mess something up i should be good to 
Thanks for all your help


On Monday, February 12, 2018 at 11:28:34 AM UTC-5, gary wrote:

> I am getting an error lineardelta.hal:739: parameter or pin 
> '' not found
> can't seem to find the error or why the pin is not found i have it set 
> got it here first then commented it out
> # E2 Heater FET 4
> #setp       921
> #setp hpg.pwmgen.00.out.03.enable    1
> #setp hpg.pwmgen.00.out.03.value     0.0
> now getting it at next one in line the fan '' not 
> found 
> The bed, E0 and E1 are not having a pin problem
> its with a cramps.hal I have used this config setup before no problem
> i am running, and loading the cramps_bbio
> any suggestions as where to look for the pin problem?
> Thanks gary 

website: blog: github:
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
Visit this group at
For more options, visit

Reply via email to