Work now !!!!!!

Really happy 😊 finally only config issue from Hal and ini 

Thanks a lot for your support !




Le 23 févr. 2018 à 12:33, Aurelien <golfop...@gmail.com> a écrit :

>>> I think the author only opened the issue and not do the job for standard 
>>> xhc because( i think), rubienr have only new model and report issue founded 
>>> when developping new model, so i hope the issue is not related for this new 
>>> unit. (for sure not sure at all^^)
>> 
>> Thanks a lot for DEBUG=5 info
> 
> now i can show that the problem (i hope) is duplicate  hal linked 
> configuration i try to fix myself
> 
> 
> same as your test i can run in simulation mode without issue.
> 
> 
> Many thanks !!
> -- 
> website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
> https://github.com/machinekit
> --- 
> You received this message because you are subscribed to a topic in the Google 
> Groups "Machinekit" group.
> To unsubscribe from this topic, visit 
> https://groups.google.com/d/topic/machinekit/jwvEEPT-HMg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to 
> machinekit+unsubscr...@googlegroups.com.
> Visit this group at https://groups.google.com/group/machinekit.
> For more options, visit https://groups.google.com/d/optout.

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to