I changed line 164 in /usr/bin/gladevcp and and commented out the last
parameter. it seems to work. But I don't understand this code so it might
be 'a bad thing'
from:
objlist = h(halcomp,builder,useropts, compname)
to:
objlist = h(halcomp,builder,useropts) #, compname)
On Thursday, April 19, 2018 at 6:42:27 PM UTC-5, sliptonic wrote:
>
> I've converted a small lathe for use in our hackerspace. It uses a mesa
> 7i76e card. I'd like to use Andy Pugh's 'Lathe Macros'
> <https://forum.linuxcnc.org/41-guis/26550-lathe-macros> but I'm having
> trouble getting it to work.
>
> It works perfectly in LinuxCNC but I get random inexplicable errors from
> the mesa card if I run linuxcnc. Machinekit works flawlessly, never
> throwing the errors I see in linuxcnc but the lathe macros doesn't work.
>
> I'm loading this as a user tab in gmoccapy. The tab loads and the input
> fields show but the combined background svg image doesn't render.
>
> Andy suggested this could be a Gtk3 problem but I have no clue how to
> proceed, debug, or or fix. FWIW I'm running on Debian Wheezy installed
> from packages.
>
>
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
