On Wednesday, May 16, 2018 at 7:06:51 AM UTC-8, Schooner wrote:
>
>
> On 15/05/18 08:29, fairbanks-john wrote: 
> > I just made a fresh install from the git hub clone today and wondering 
> > if I did something wrong since there are a lot of warnings and notes 
> > in the installation log which I have attached.. 
> >  The .hal file I have used before for testing fails to complete 
> > loading at the below error message: 
> > 
> > 
> > 
> This bit of the print clearly shows the problem is with your config, 
> which we have no details of 
>
> /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys 
> sys.path.insert(0,"python")' 
> PythonPlugin: Python  '2.7.12 (default, Dec  4 2017, 14:50:18) 
> [GCC 5.4.0 20160609]' 
> emcTaskInit: using builtin interpreter 
> /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys 
> sys.path.insert(0,"python")' 
> PythonPlugin: Python  '2.7.12 (default, Dec  4 2017, 14:50:18) 
> [GCC 5.4.0 20160609]' 
> is_callable(__init__) = FALSE 
> is_callable(oword.on_abort) = FALSE 
> is_callable(oword.on_abort) = FALSE 
> /home/cnc/machinekit-dev/configs/cnc1/cnc1.ini:81: executing 'import sys 
> sys.path.insert(0,"python")' 
> PythonPlugin: Python  '2.7.12 (default, Dec  4 2017, 14:50:18) 
> [GCC 5.4.0 20160609]' 
> Traceback (most recent call last): 
>    File "/home/cnc/machinekit-dev/bin/gmoccapy", line 30, in <module> 
>      import hal_glib           # needed to make our own hal pins 
>    File "/home/cnc/machinekit-dev/lib/python/hal_glib.py", line 20, in 
> <module> 
>      from machinetalk.protobuf.message_pb2 import Container 
>    File 
> "build/bdist.linux-x86_64/egg/machinetalk/protobuf/message_pb2.py", line 
> 16, in <module> 
>    File "build/bdist.linux-x86_64/egg/machinetalk/protobuf/nanopb_pb2.py", 
> line 26, in <module> 
> TypeError: __init__() got an unexpected keyword argument 'syntax' 
> Shutting down and cleaning up Machinekit... 
>
> Run an axis_mm sim, and I expect it will run perfectly, the problem is 
> with your config / gmoccapy / python 
>
> syntax='proto2' has been in there for 2 years 
>
> https://github.com/machinekit/machinekit/blob/master/src/machinetalk/proto/src/machinetalk/protobuf/nanopb.proto#L8
>  
>
> but I don't use python, protobuf or gmoccapy, so can't help there, other 
> than wonder why your path to the machinetalk/protobuf files is 
> completely different 
> They should be in 
>
> /home/cnc/machinekit-dev/lib/python/machinetalk/protobuf 
>
> Are you using files from another build? 
>
>
> Warning:  Logging appears to be not working 
>
>            Found rsyslogd configuration and /var/log/linuxcnc.log 
>            exists, but a test did not appear in the log. 
>            Please investigate. 
>
> Makefile:842: recipe for target 'setuid' failed 
>
>
> This occurs as it says.  Sometimes the rsyslogd daemon has died, the 
> linuxcnc.log has the wrong permissions and cannot be written to, or 
> similar. 
> You also do need to check that the setuid part worked, but there is no 
> indication it did not when realtime was started 
>
>
>

-- 
website: http://www.machinekit.io blog: http://blog.machinekit.io github: 
https://github.com/machinekit
--- 
You received this message because you are subscribed to the Google Groups 
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.

Reply via email to