Yesterday I made a new uSD from bone-debian-9.5-machinekit-armhf- *2018-08-30*-4gb.img. I did "sudo apt-get update", "sudo apt-get install ssh" and "sudo apt-get install xorg" so that I can run "ssh -X". I followed Robert Nelson's advice
> -nuke these lines: > > https://github.com/machinekit/machinekit/blob/master/configs/ARM/BeagleBone/Xylotex/setup.sh#L34-L51 > > except that I nuked them in the setup.sh file in CRAMPS config > and use: > *uboot_overlay_pru=/lib/**firmware/AM335X-PRU-UIO-00A0.**dtbo * > in /boot/uEnv.txt > - show quoted text - > I have attached a link to the uEnv.txt file in pastebin and it already has "*uboot_overlay_pru=/lib/**firmware/AM335X-PRU-UIO-00A0.**dtbo*" uncommented. I don't see what the error is. /sys/class/uio/ is empty. And even after trying to run machinekit then rebooting /sys/class/uio is still empty. uEnv.txt https://pastebin.com/LqBvxaRr -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
