I also get this error when trying to launch machinekit;
machinekit@mksocfpga-nano-soc:/usr/bin$ machinekit
MACHINEKIT - 0.1
application-specific initialization failed: no display name and no $DISPLAY
environment variable
Error in startup script: invalid command name "image"
while executing
"image create photo -file $f/$i.gif"
invoked from within
"if [file exists $f/$i.gif] {
return [image create photo -file $f/$i.gif]
}"
(procedure "linuxcnc::image_search" line 7)
invoked from within
"linuxcnc::image_search machinekit-wizard"
invoked from within
"set logo [linuxcnc::image_search machinekit-wizard]"
(file "/usr/lib/tcltk/linuxcnc/bin/pickconfig.tcl" line 31)
machinekit@mksocfpga-nano-soc:/usr/bin$
On Thursday, November 8, 2018 at 10:54:48 PM UTC+1, Johan Jakobsson wrote:
>
>
>>> I installed a DE10 nano with the console (no HDMI) image.
> For some reason it gets 2 IP's. One from my DHCP and another IP that I
> don't recognize. Tried setting a new MAC and it got a new IP but it was in
> the same 169.254.x.x/16 range. I can remove it with "sudo ip addr del
> 169.254.16.247/16 dev eth0" but it returns when I reboot the DE10 board.
> Perhaps there is a local DHCP scope set in the image?
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
