Hi Frederic, > On 11 Dec 2018, at 07:43, Frederic Rible <[email protected]> wrote: > > Hello, > > After having battled with original analog drives, we are considering > switching to EtherCat servo drives for our Mori-Seiki SL-0 lathe retrofit. > Any information about EtherCat maturity under MK running on a PC? > Also, we are studying CANopen alternative, but EtherCat looks more promising: > any feedback?
We’re running the LCEC (LinuxCNC Ethercat Component) in a non-CNC project, and Ethercat works fine. I’d not go towards CANOpen because of the bandwidth and there’s no real driver out there. You could also check out the STMBL project. https://github.com/rene-dev/stmbl <https://github.com/rene-dev/stmbl> Bas > > Thanks. > Frederic > https://www.electrolab.fr/ > https://wiki.electrolab.fr/Tour:MoriSeiki:SL0 > http://cnc.f1oat.org <http://cnc.f1oat.org/> > > > > -- > website: http://www.machinekit.io <http://www.machinekit.io/> blog: > http://blog.machinekit.io <http://blog.machinekit.io/> github: > https://github.com/machinekit <https://github.com/machinekit> > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/machinekit > <https://groups.google.com/group/machinekit>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
