On 1/21/2019 9:02 AM, [email protected] wrote: > Hello Charles, > > thank you for the quick answer. If this is not supported I do not need to > scratch my head anymore. > Unfortunately I do not think I will be able to do that kind of programming. > > For now I will try a little hardware patch with a HC7400 chip, as described > here. > > https://www.cnczone.com/forums/servo-motors-drives/338396-step-direction-signal-converted-cw-cw-ccw.html > > That works on the PC with parport assembled a strip board. Tried it today.
That looks like a good solution. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
