I am pretty shure that gmoccapy will not perform well on BBB. I am the developer of that GUI, i tested on my own BBB with 3D printer, with such big files the performance of any gui with preview is very bad and imho not usable. For normal mill or lathe operations you might be able to live with the poor grafic performance of BBB, i decided not to use BBB any more on such machines. And i need to inform, that i do not develope gmoccapy any more for machinekit! The development for linuxcnc is still ongoing and a new release will be pushed soon.
The desision of not developing any more for machinekit is not against machinekit!!! It is just a matter of the need to mantain a third branch (LinuxCNC 2.7 , master and machinekit). All need different python handling of signals and commands, i.e. Joint axis support, etc. If i ever get time to develop also a GUI for machinekit, you will shure be informed✋ Norbert -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
