I have tried my best to understand the fundamental ins and outs of running Machinekit on BBB from my windows desktop, but there are so many technical concepts and approaches that I just can't fully understand everything. Although it seems I'm towards the end of this, I'm already frustrated, and since working for a sort of tight deadline I need some practical help, and need that in layman's terms, into the bargain, please.
I followed these instructions <https://machinekoder.com/machinekit-debian-stretch-beaglebone-black/> to run M.K. on BBB from my desktop. But I am badly thrown off. I have apparently successfully done everything on that instruction page, but just don't know *how to start what!! *I don't know *what command to use on the PuTTy. * (Please, as far as possible, don't direct me to start everything from scratch, as I already had Debian Jessie installed on BBB, but decided to change it to Stretch.) My newbie questions: 1. Should Machinekit Client be installed on my Windows OS or on the BBB?! (I already have M.K Client on my Windows OS. but once I start it, it keeps loading in no veil, with *no available instances*.) 2. According to the first question, which link should I go with on this page <https://github.com/machinekit/QtQuickVcp>. 3. AFAIK, I need a U.I on my desktop to give me access to the M.K. Is this UI the Machinekit Client? How can I start it from PuTTY? FYI: Operating System: Debian GNU/Linux 9 (stretch) Kernel: Linux 4.4.155-ti-rt-r153 Architecture: arm Thanks in advance -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
