OK, just another test, i switched over to the uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo
in uEnv.txt, and I still do not see uio_pruss in the lsmod listing. Now, when I was tinkering with uEnv.txt, I did take out the uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo line and replace it with my .dtbo file from another project, that JUST had the pin mapping info. So, maybe some startup script noted there was no pruss that could be started, and has set some variable somewhere that is preventing pruss from starting now. I'm just guessing... Any suggestions to seeing why uio_pruss is not starting? Should be a message somewhere. Thanks, Jon -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
