On 4/26/2019 5:40 PM, Jon Elson wrote:
Any suggestions to seeing why uio_pruss is not starting? Should be a
message somewhere.
I have found the overlay logic and PRU support have a fairly appalling
lack of helpful error messages. :-/
I recommend you start with an unmodified recent release and verify the
UIO PRU driver is loaded, then add one piece at a time to try and get
the configuration you want (again, it's probably easiest to just use the
universal overlay unless there's a strong reason not to).
--
Charles Steinkuehler
[email protected]
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
