On Saturday, 4 May 2019 23:12:06 UTC+2, Tom M wrote: > > I was looking for a solid model for a cramps board to design an enclosure > around. Any chance someone has one? > > Tom >
Since It takes a considerable amount of time to generate the .step file via Freecad stepup wb I attach the files generated by: kicad and Freecad plus the 0.18 project file for comparison (don't blame me about the odd colours in the step files...). Since the files were too large here's a link instead: https://drive.google.com/open?id=1UqOPBWCDMkjOseL8jEgGgOme9yZ1Sber -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/155a7024-5ffc-4d53-af89-6337c1b78532%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
