On Tuesday, 7 May 2019 16:18:25 UTC+2, [email protected] wrote: > > > > On Saturday, 4 May 2019 23:12:06 UTC+2, Tom M wrote: >> >> I was looking for a solid model for a cramps board to design an enclosure >> around. Any chance someone has one? >> >> Tom >> > > Since It takes a considerable amount of time to generate the .step file > via Freecad stepup wb I attach the files generated by: > kicad and Freecad plus the 0.18 project file for comparison (don't blame > me about the odd colours in the step files...). > > Since the files were too large here's a link instead: > https://drive.google.com/open?id=1UqOPBWCDMkjOseL8jEgGgOme9yZ1Sber >
or: https://drive.google.com/drive/folders/1eov0Xt9tPmHxC5rfMFcTP79cg6hjTgrD?usp=sharing -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/c0c4d661-3697-4403-856a-f5e6a99dec20%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
